Huaguang Positive and Negative Printing Plate

+Quilk inking, run length +PS/ CTCP/CTP Plate +Aluminum presensitized negative working plates +Positive working plates

Huaguang Positive and Negative Printing Plate

 PS/CTCP/CTP Plate

Huaguang YP-II ­Technical Specifications
Plate type	Conventional positive plate
Substrate	Electro-­chemically grained and anodized lithographic aluminum.
Gauge	0.15/ 0.30 (mm)
Maximum width	1320 mm
Spectral sensitivity	350-­420 nm
Safelight	UV filtered or Yellow
Sensitivity	130- ­150mj/cm2
Color change	Blue­ Green to Green after exposed
Developer	Huaguang PD developer (concentrated solution), 1 liter can process 15 sqm. Recommended dilution ratio:1:3( machine process), 1:4( manual process)
Dot reproduction	2%­-98% in 200 lines/inch
Packaging	0.15mm 100 pieces/box
	0.30mm 50pieces/box if length<1030mm;
	30pieces/box if length≥1030mm;
	25pieces/box if the area>1m2
Shelf life	18 months when stored in a light­-free area away from excessive cold, heat and high humidity
Run length	Above100, 000 (Actual run length may vary according to press, ink and stock conditions.)
Huaguang UV-­P Technical Specifications
Plate Type	Positive offset plate for UV­-CTP plate making
Application	Medium for sheetfed/web offset press
Substrate	Electro-chemically grained and anodized aluminum
Gauge	0.15 mm/ 0.20/ 0.25/ 0.30/ 0.40 mm
Maximum short grain width	0.15/0.20 mm: 1050 mm
	0.30/0.40 mm: 1320 mm
Spectral sensitivity	350-­420 nm UV light
	365-­375 nm& 405­-410 UV laser
Safelight	UV filtered or Yellow
Platesetter compatibility	Luscher XPose! UV, Basysprint UV­-Setter, Cron UVP etc.
Sensitivity	50­-60mj/ cm2
Color change	Blue­-Green to Pale Green after exposed
Development	Conductivity: min. 55 ms, max. 70 ms
	Temperature: 20­-25 °C PH 13.00-­13.40
Developer	Common positive offset plate developer
Dot reproduction	2%­-98% in 200 lines/inch
Final image colour	Blue-­Green
Shelf life	18 months when stored in a light­-free area away from excessive cold, heat and high humidity
Run length	0.30/0.40 mm above 100,000 (Actual run length may vary according to press, ink and stock conditions.)
Huaguang TP-P Technical Specifications
Plate Type	Positive working, no preheat thermal digital plate, with optional   postbake for longer runs
Application	Medium for sheetfed, web offset press
Substrate	Electro-chemically grained and anodized aluminum
Gauge	0.15/0.30 mm
Maximum short grain width	1320 mm
Spectral sensitivity	800-­850nm
Platesetter compatibility	All the main brands in market, like Kodak Trendsetter/Lotem/Magnus, Screen PT-R, Heidelberg Topsetter/Suprasetter etc.
Laser energy required	120 mJ/cm2- 160 mJ/cm2 ( varies based on platesetter manufacturer and developing condition )
Resolution	1% to 99% @ 200lpi. Dependent upon capability of imaging device.
FM capability	20 micron stochastic.
Processors	Recommended: Glunz&Jensen, Kodak Plate Processors
Developer	Huaguang TPD-III, Kodak ­Goldstar Premium, IMAF Therm830/One Plus etc.
Processing	23°C/30 seconds
Run length	100,000 impressions unbaked, over 500,000 impressions baked. Actual run length may vary according to press/paper/ink conditions
Safelight	Daylight handling
Shelf life	12 months, under recommended storage conditions
Transport and storage	Store plates flat in their packaging, away from excessive cold, heat or high humidity.
	Recommended condition is: Temperature 10-­26°C & RH between 40­-70%.
Huaguang PPVS Technical Specifications
Plate Type	Blue negative working, violet photopolymer digital plate
Application	Newspaper printing
Substrate	Electro-chemically grained and anodized aluminum
Gauge	0.15mm, 0.30 mm
Maximum width	1320 mm
Spectral sensitivity	405 nm
Platesetter compatibility	All the main bands in market, like Agfa/FFEI&FUJI/Krause/ ECRM/ Highwater/ Escher­-Grad/ Dotline
Sensitivity	70­-80 uJ/cm2
Resolution	3% to 97% @ 150 lpi under calibration
Processors	Glunz&Jensen interpolate/Raptor, Height inca/maya, Grafmac etc.
Developer	Huaguang PPD, Fuji LP-DWS, Agfa PL­-10, IMAF NEGA 910, Varn PND etc.
Processing	Preheat temp setting 93­-104°C ( plate surface temp.)
	For Huaguang PPD and Fuji LP­-DWS: Developer temperature 24-­26°C / Dwell time 16­-20 seconds.
	For Agfa PL­-10:Developer temperature 24°C / Dwell time 16-­17 seconds
Run length	More than 150,000 impressions
Safelight	For manual handling and platesetting loading, darkroom conditions with VG10 / FV50 / G10 safelight is required
Shelf life	12 months, under recommended storage conditions
Transport and storage	Store plates flat in their packaging, away from excessive cold, heat or high humidity.
	Recommended condition: 20°C­--26°C, with RH between 40%-­60%.

Packing:

Transport:

Precautions:

Huaguang Positive and Negative Printing Plate